Linear cutting stapler operating device

Linear cutting stapler operating device

1. Check whether the size of the nail bin matches the size of the instrument;

2. Before inserting the instrument and nail bin into the nail bin, ensure that the instrument is in the open position;

3. Check whether the nail bin has seam nail guard board;

4. Slide the nail bin into the bottom of the nail box jaw and press the nail bin into place.

Linear cutting stapler operation

1. Buckle the closing lever until it is locked in place, close the jaw of the instrument, and the sound of "click" indicates that the closing lever and jaw have been locked;

2. Check that the stapler correctly secures the nail box. The instrument is introduced into the body cavity through an operation port of suitable size;

3. Place the instrument around the tissue to be nailed;

4. The jaws of the instrument are fixed, the closing rod is buckled to lock, and the jaws are closed. After hearing the "click", it indicates that the closing rod and jaws are locked. After closing and before firing, keep the jaw stationary for 15 seconds to form better compression and staple forming;

5. After firing, release the firing rod to move the cutter head to the original position;

6. Gently pull the instrument away from the broken tissue to ensure that the tissue has been released from the jaw;

7. To take out the instrument from the body cavity, buckle the closing rod until it is locked to close the instrument jaw.